a) Prepare a 600-word (+/- 10%) report in response to theReport Specificationslisted below.b) Download a copy of the rubric (feedback form) and use it to make sure you have addressed the...

1 answer below »







  1. a) Prepare a 600-word (+/- 10%) report in response to the
    Report Specifications
    listed below.





  2. b) Download a copy of the rubric (feedback form) and use it to make sure you have addressed the criteria



    listed for this assessment, available on the
    Assessment 1 Part C Landing Page.





  3. c) The following guidelines should be followed for submission of an assessment produced to a professional



    standard:





    • This assessment should be drafted in a report format, with title page, headings, clear structure, and



      formal, professional language.





    • Remember to write professionally and in the third person

      as if you are an employee of CRATOX reporting to management.





    • Your report must have an Introduction, Discussion, and a Reference List.





    • Line Spacing must be 1.5 spacing and font size 11 or 12.







  4. d) The process you use to interrogate this model must include the following headings:





    • Brief Introduction





    • Materials and Methods





    • Results





    • Discussion on the interrogation of BIM models for building services.







  5. e)

    Word Count





    • Communicating facts clearly and concisely is an important skill to develop in preparation for the



      professional workplace. Therefore, it is not appropriate to exceed the word limit and any
      words outside of the relevant limit will not be considered for assessment
      . However, a <10% error="" is="">





    • The
      word count
      includes all text including headings, tables, captions, in-text referencing within the main body of the report, but excludes the cover page, contents page(s) and Reference List/Bibliography.







  6. f)

    References





    • Ensure that all research and sources are relevant, current and reliable.





    • Ensure that your in-text citations and reference list adhere to Harvard UniSA style.





    • Please note that submissions lacking in-text referencing and/or reference list may be referred to



      academic integrity.





    • In
      this instance only, ‘author’s own...’ in
      -text reference is not needed for each snip. Instead, make an



      appropriate statement prior to the list of figures that all images were produced by the author of the submission unless otherwise noted.







  7. g) Submit your file through the submission link by 12 pm, Friday of Week 10.





  8. h) Please note that you are submitting work for
    Part C
    of Assessment One only, you don’t need to re
    -submit any work from Part A or B.









UO Building Services




page2image1332233072
page2image1332226720



Assessment 1 Part C

BIM Model Interrogation
Page 2/5









S
CENARIO







UO Building Services




page3image954365760
page3image954378176



The final task that you are being given as CRATOX staff member is to demonstrate your skills in utilising BIM to support the display of building service engineering functions effectively.







For this task, you will need to download a BIM model from the
Assessment 1: Part C Landing Page
and interrogate the model as outlined in the Report Specifications below.



Part C

Report Specifications





  1. Hide the roof & sisalation that sits under the joists exposing the ceiling ductwork. Create viewpoint(s) of this exposed ceiling and mark it up
    clearly highlighting
    each of the following:





    • Supply diffuser Tuttle and Bailey





    • Rectangular Square bend - Flanged





    • Light fitting 300 x 1200YS FSNxxFusion SRS1x14 28w





    • Rectangular ductwork





    • Flexible ductwork







  2. Section an elevation of the building then create viewpoint(s) of this section and mark it up
    clearly highlighting
    each of the following:





    • 200x75x23 Parallel Flange channel supporting upper floor





    • Basic wall





    • Insitu Concrete 100mm floor





    • Cold water pipe







  3. Section the roof off the building exposing the ground floor plan then create a viewpoint(s) of this section and mark it up
    clearly highlighting
    each of the following:





    • M Urinal Wall 3D





    • Grab bar horizontal





    • Door Sliding - 2 Panel 3





    • Stairs





    • System panel glazed







  4. Section the floor off the building showing a ground or first floor reflected ceiling plan and mark it up
    clearly highlighting
    three (3) of each of the following pieces of equipment:





    • 3 x Supply Grilles





    • 3 x EWIS speakers







  5. Create viewpoint(s) of the roof and mark it up
    clearly highlighting
    one of each of the following:





    • ME-MOD Evapunit

      Breamar RPD1800





    • Solar Collector Assy

      25Deg frame & Rinnal Enduro Panel





    • Gridmesh Flooring







  6. Measure the ground floor timber deck that is situated adjacent the front glazed panels, give the length, width and total area of this deck on a marked-up viewpoint.





  7. Section the roof and upper floor off the building and measure the length, width and total area of the internal ground floor area on a marked-up viewpoint.





  8. Measure the area of the front glazed elevation. Give the length, width and total area of the glazed front elevation on a marked-up viewpoint.






page3image1242092016




For you report, prepare a response to the specifications in the instructions below. Be sure to read the information under the heading
Research and Preparation
and
Further Advice
on page 4, to help you work through this assessment task. In your report, you must
state any assumptions
you have made.








Assessment 1 Part C

BIM Model Interrogation
Page 3/5









9. Go to the selection tree to find and highlight the following items on the model. Then create viewpoint(s) showing the objects listed below and mark the viewpoint(s) up with a
clear
description of the object and pointing out the object with an arrow.



Notes:





  • If it helps to section or hide another object to view these objects, then please do so, but don't hide everything else as the assessor wants to see how the item fits in with its surroundings.





  • The last item underlined in bold is the object we want you to highlight on the model.





o
9a

Roof plan

Mechanical Equipment

HY 1800x600 HWU


o
9b

Ground floor

Structural framing - Universal beam -
310UB40.4


o
9c

Ground floor

Specialty Equipment

Shower Head on Rail

Grab Bars


o
9d

Ground floor

Specialty Equipment

Electrical Hand Dryer Type 1


o
9e

Ground floor

Curtain Panel

System Panel

Spandrel


o
9f

CEILING-GF

Mechanical Equipment

LG-VRF_Indoor-Wall mount 7-15MBh
o
9g - CEILING-GF

Structural Framing

PFC Parallel Flange Channel


o
9h

Ground floor

Fire Alarm Devices

LEDXM2P

LED Exit


o
9i

Ground floor

Floors

Insitu Concrete - 120 mm


o
9j

First floor

Speciality Equipment

Aust Lift Centre Door


o
9k

First floor

Furniture

Chair Work (2)


o
9l

Ground floor- Ceilings

Compound Ceiling PB



Research and Preparation





  1. a) Get some practice

    Download the
    Assessment 1 Part C BIM Model
    and spend some time working with the model in Navisworks.





  2. b) Watch the
    Navisworks Tutorial Videos
    to become familiar with some of the functions in Navisworks.





  3. c) Get started by setting a Microsoft Word Document with the sections described in the assessment.





  4. d) Start populating your document with your marked-up screenshots as you complete them.





  5. e) Review all the components you are supposed to identify and ensure you know what they are and what they look like.





  6. f) Ensure you are comfortable with measuring and markups as described in the assessment.





  7. g) Are you confident you understand what needs to go into each section? Make notes of anything of which



    you are unsure and ask questions in the
    Course Q&A forum
    .






Answered 14 days AfterNov 23, 2022

Answer To: a) Prepare a 600-word (+/- 10%) report in response to theReport Specificationslisted below.b)...

Banasree answered on Dec 07 2022
36 Votes
1.
2.
3.
5.
6. Timber deck –
3.99 x 16.59 = 66.194 m2
3.99 x 0.43 x 2 = 3.43m2
16.59 x 0.43 =
7.133 m2
Total = 76.754 m2
7.
17.84 x 30.64 =546.61m2
8.
1.67 x 1.06 x 20 = 35.404 m2
9.
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here