all thesesquestion must be answeredin the files I'vesent youplease and reference
must be BCA and Australianstandard
project 1 the question is talking about is the first set of files
south morang files is project two
toorak rd files is project 3
and its not report its only question and answer thanks but all your answersis through the files i will send to you
ill so send you a copy of the NCC volume when which you should reference
In relation to the Project 1 documentation that you have received
, determine the required FRL of the floor between the lower level and the upper level as per the deemed to satisfy requirements of the NCC 2019 (amd 1) BCA Volume One. (assume no concessions apply). Explain each step of your determination.
Research and recommend a material and method of construction (other than in-situ concrete construction) for the floor in order to achieve the required FRL level. Provide the reference material in your answer.
1.4.1.
List all the structural design actions to be considered when designing the structure of the building to satisfy the performance requirements of the Section B of the NCC 2019 (Amd 1) BCA Volume One.
(For which project?)
1.4.2. Referring to the recommendations of the geotechnical investigation report for Project 2, indicate the different footing types and the foundation material that each of the footing types need to be founded on.
1.4.3. In relation to Project 2, the warehouses Blocks A & B there is a proposed Raking Angle RA1 which is secured to the external walls please indicate what this member RA1 is supporting. Give reference of the drawing number and detail number that you referred to for this answer.
1.5.1. Referring to Project 2 structural drawings, determine the materials and the type of construction being proposed for the external walls of the warehouses. Which NCC Section C performance requirement is applicable to this type of external wall construction? Give the clause number and explain the applicability to Project 2.
1.5.2. Assuming the Project 1 is in a cyclonic region, which part of the Section B of the NCC 2019 (amd 1) BCA Volume One would you refer to for the design of the structure of the building?
1.5.3. Assuming the Project 1 is in an earthquake prone area, which part of the Section B of the NCC 2019 (amd 1) BCA Volume One and which Australian standard would you refer to for the design of the structure of the building?
1.6.1. Referring to the Project 3 Architectural drawings and provide a summary (in your own words) of the specification of the inter-tenancy wall type P1 (between 2 SOUs). What is the sound insulation requirement for this type of wall as per the BCA? Provide reference to the BCA clause.
1.6.2. Refer to structural drawing S960 in Project 3 and indicate the method of the form of concrete construction used for floors and indicate the materials that make up this form of construction.
1.6.3. Refer to the following webpage and list 2 uses/ benefits of a raised access floor system. (link
https://www.tateinc.com/en-au/learning-center/benefits-of-underfloor-service-distribution-en)
(Is this question related to the project if it is for which one?)