Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 1 of 9 Assessment Resource Summary Unit Details CUAPOS201 Perform basic vision and sound editing Assessment Methods Written...

1 answer below »
CUAPOS201 Perform basic vision and sound editing


Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 1 of 9 Assessment Resource Summary Unit Details CUAPOS201 Perform basic vision and sound editing Assessment Methods Written Questions Assessment Task 1 Knowledge Assessment Assessment Task 2 Report Assessment Task 3 Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 2 of 9 Unit Summary This unit describes the skills and knowledge required to perform basic editing functions for screen productions. It applies to individuals responsible for digitising, cutting and logging pre-recorded image and audio content under the direction of an experienced editor. Within clearly defined parameters, they also edit content using the basic functions of editing software. No licensing, legislative or certification requirements apply to this unit at the time of publication. Prerequisite Units There are no mandatory pre-requisite units for this competency. Co-requisite Units There are no recommended co-requisite units for this competency. All products purchased remain the intellectual property of Sacred Heart International College. All rights reserved; no part of any publication provided by Sacred Heart International College may be reproduced by any means for use outside the purchasing organisation, without the prior written permission of Sacred Heart International College. Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 3 of 9 Summative Assessment - Assessor Instructions It is important that in conducting assessment, the assessor undertakes the following: Prior to conducting the assessment  Read the assessment tasks as detailed throughout this document  Contextualise the task (and checklist) to ensure it reflects the students working environment. (Be sure to check with the mapping document to ensure any contextualisation still covers the unit requirements)  Read the assessor instructions and checklist prior to commencing the assessment  Ensure the assessment environment is suitable for the parameters of the task, to ensure the students will have an appropriate opportunity to demonstrates their skills  Make suitable modifications to the assessment environment (if required), to allow all tasks to be observed  Ensure the student is allocated the appropriate time and resources for the task  If undertaken on the job - discuss the assessment with the workplace supervisor, to so they are aware of what will happen throughout the process  If undertaken on the job - Determine and agree with the supervisor an acceptable time frame for each assessment.  Advise the student prior to conducting the assessment of: o what will occur throughout the assessment process o when the assessment will occur o the level of competency expected (review the checklist or the criteria for the task to ensure the student understands the assessment process and the expectations) o the RTO reasonable adjustment process and offer adjustment for any students needing assistance o the RTO re-assessment and appeals process  You should not tell the student how to undertake the task, as it would lead the student and render the assessment process invalid. The student should have been taught "How" to perform each task during the training stage, and is expected to know this prior to commencing the assessment.  Do not give the student a copy of the Assessor Checklist or Sample Answers prior to the assessment. The student instructions provide appropriate detail for the student on the expected level of competency for each task. Conducting the assessment  Establish and oversee the evidence gathering process to ensure it remains valid, reliable, fair and flexible  Advise the student when to commence the assessment  Observe the student undertake the tasks as outlined  Record your observations in the assessor checklist  Where a checklist point is not observed due to an inappropriate environment, or for a reason outside the students control, modify the scenario to allow the student an opportunity to perform the associated task  Where a checklist point is not appropriate, write "N/A" in the space provided  Incorporate allowable adjustments to the assessment procedure without compromising the integrity of the assessment. Be sure to make appropriate notations on the assessment checklist to explain any variances to the assessment process (such as probing questions, alterations to assessment environment, etc.) to ensure the assessment process is transparent (and the assessment remains Valid)  Gather supporting documentation where available and appropriate (as evidence) Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 4 of 9  Do not interfere with the assessment unless the students’ actions impose a risk to themselves or anyone else. In the event that the actions of the student impact on the safety of any person - you are to immediately cease the assessment and take actions to reduce the identified risk.  If a student performs an action incorrectly, mark it as such. Record what you see, not what you want to see.  Once the assessment is complete, advise the student that the assessment has ceased, and record your comments in the sections provided. Making and recording the decision  The student needs to be deemed satisfactory in all assessments to gain competency.  You are to provide feedback* to the student on their performance and/or the outcome from their assessment (whether satisfactory or not yet satisfactory)  If a student has been assessed as "Not Yet Satisfactory" on their performance in an assessment they should be offered information about the appeal process and/or a reassessment opportunity.  Using the evidence gathered and the rules of evidence (validity, reliability, sufficiency, currency and authenticity) determine the final outcome for the student. If you are in doubt, gather further evidence to help guide your decision.  Assess the students on what you observe during the assessment period, not on their actions before or after the assessment.  If you are marking the student NYC, ensure you outline why you have made this decision, and provide advice on how the student can improve their skills / knowledge prior to reassessment; or if the re-assessment opportunities have lapsed, provide advice on appeals and or re-enrolment.  Record the assessment results onto the Assessment Summary / Cover Sheet, ensuring each section is complete  Attach all evidence (projects / checklists / tests, etc.) to this form.  Submit the completed Assessment Summary/ Cover sheet and associated evidence for processing as per your RTO procedures Providing feedback  Provide constructive feedback to the student on their performance during the assessment period. Do not make any comments on actions undertaken prior or after the assessment period.  Provide the student with: o Their assessment result o Clear and constructive feedback based on the assessment decision o The reasons underpinning your assessment decision o Information on ways of overcoming any identified gaps in competency revealed by the assessment the opportunity to discuss the assessment process and outcome information on reassessment and the appeals processes. o An opportunity for reassessment if appropriate or requested by the candidate Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 5 of 9 Instructions for Students: Written Questions  This is an individual assessment, but you are to research and can use notes to assist.  The activities are designed to assess your understanding of the unit as well as your skill and knowledge.  All activities will need to be answered correctly to be deemed satisfactory in this task.  Your answers will form part of the evidence gathered for this unit.  Time allocated: 30 min each Knowledge Assessment (Q & A)  This is an individual assessment, but you can research and use notes to assist.  The activity is designed to assess your understanding of the unit as well as your underpinning knowledge.  All questions will need to be answered correctly to be deemed satisfactory in this task.  Your answers will form part of the evidence gathered for this unit. Time allocated: 120 min Report  This is an individual assessment, but you are to research and can use notes to assist.  The project is designed to assess your understanding of the unit as well as your underpinning knowledge.  To be deemed Satisfactory in this assessment you need to answer correctly in your own words, clearly printed, word formatted and typed in English  Your answers will form part of the evidence gathered for this unit. Time allocated: 180 min  Submit your assessment by the date set by your assessor  The length of your answers will be guided by the description in each assessment: Short answers: 4 typed lines or 50 words Long answers: 8 typed lines or 100 words Brief report: 1 typed page or 500 words Mid Report: 2- 4 typed pages or 1000 words Long Report: 4 – 6 typed pages or 2000 words  Do not plagiarise. Plagiarism is considered cheating. Please refer below for our policy in regards to cheating  Do not cheat during this assessment. Anyone caught cheating will automatically be excluded under the Disciplinary Rules and their opportunity for assessment will be subject to the outcome of an Appeal Process or Disciplinary Hearing  Ask your assessor if you do not understand a question. Whist your assessor cannot tell you the answer, he/she may be able to re-word the question for you  Reasonable adjustment: If you require any adjustments to accommodate a need in order to complete this assessment, please talk to your assessor. Arrangements will be put in place to ensure a fair and flexible approach is undertaken for this assessment. Please note that the range or nature of the adjustment will ensure that the outcomes of the unit are not compromised.  Accommodation for LLN and appeals process is available. Please alert your assessor if you feel this
Answered Same DayDec 03, 2021CUAPOS201Training.Gov.Au

Answer To: Student Assessment CUAPOS201 Student Assessment V1.0 September 2018 Page 1 of 9 Assessment Resource...

Azra S answered on Dec 06 2021
146 Votes
Written Questions Assessment Task 1
1. What is batch capture?
Batch capture is a feature in editing programs. This feature allows the program to take shots or capture lists or batches of clips from required videotapes.
2. Define the terms production logging, archive logging and cataloguing.
Production logging refers to la
belling of source video according to its content in order to make it easier for editing later.
Archive logging refers to labelling of stored video in order to make it available for use or edition at a later stage.
Cataloguing refers to the process of storing information like creator names, titles, and subject terms that are used to describe resources and through bibliographic records.
3. What is a Nonlinear Video Editing Method?
A Non-linear video editing is a method accomplished through loading videos into a computer from another source like an analogue or digital tape. This editing process then creates a new 'tape' and stores all the commands that were input by the operator. The reason this method is popular is because it enables the operator to cut, copy and paste scenes in whichever order he pleases and implement any desired changes on the video.
4. Describe the QuickTime (.mov or. qt) format.
The QuickTime format stipulates a multimedia container file containing one track or several tracks, with each storing a single data type, whether audio, video or text. It also contains an encoded media stream or reference to such a stream in another file. that contains one or more tracks, each of which stores a particular type of data: audio, video, or text (e.g. for subtitles). Each track either contains a digitally-encoded media stream (using a specific format) or a data reference to the media stream located in another file.
5. When editing a big project for the first time ever, it’s super easy to just throw everything onto your Desktop and hope for the best. Well, to say it simply, don’t do that. Every single time you start an editing project, you create something called a “project directory”. What is a project directory and what goes into it?
A project directory refers to the directory in which an editor stores project information of all kind. The information includes, each employee’s role, address, phone numbers, emails, names of important contacts etc.
6. Provide one example of a problem that can occur in quality or content and outline how you could address the problem.
During editing a common problem that occurs is reduction in the quality of the video. The video might be originally of a good quality, but after editing the quality of the video may deteriorate. Images may become pixelated, get blurry, lose sharpness, flicker or sometimes not play smoothly. In such a case, it is possible that the video settings have been changed wihle saving. In order to fix this, we need to ensure that the quality of the video before and after editing is the same.
Knowledge Assessment Task 2
1- What do the numbers 720p, 1080p, 1440p, 4K and 8K signify?
The number 720p, 1080p 1440p, 4K and 8K signify resolution or the video quality of a given video. It refers to the number of pixels present horizontally and vertically within the frames of the video.
720p = 1280 x 720 – this resolution stands for...
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here