Multiplexed versus non-multiplexed bus. Consider a bus on which all transactions require sending an address message with a 32-bit address field and a 4-bit control field from the bus master to a bus...

Multiplexed versus non-multiplexed bus. Consider a bus on which all transactions require sending an address message with a 32-bit address field and a 4-bit control field from the bus master to a bus slave. Read transactions, that comprise 70% of all transactions, are then completed by having a 32-bit data message sent from the slave to the master.Write transactions, that comprise the remaining 30% of all transactions, are completed by having a 32-bit data message sent from the master to the slave. This write data message can be sent at the same time as the address message, if resources permit. You have a total of 40 bus lines to use for the design of your bus. Suggest a bus design that maximizes bus throughput. Consider both multiplexed (shared data and address lines) and non-multiplexed buses and assume that buses are maximally pipelined.