2.1 Address planning (20 marks)  Work out the IPv6 subnet for the company HQ and each branch from the given IPv6 address block. (10 marks) (Place the address allocation plan here)  Create address...

2.1 Address planning (20 marks)
 Work out the IPv6 subnet for the company HQ and each branch from the given
IPv6 address block. (10 marks)
(Place the address allocation plan here)
 Create address assignment table for the company network that contain the
address of each router interfaces, PCs and Servers. (10 marks)
(Place the address assignment table here)
2.2 IPv4 routing configuration (15 marks)
 Configure OSPF for routing between Branch-C and HQ router. Use IPv4
150.50.XY.0/30 for network between the routers.
(Place the configuration command here for each router. Then enter to Packet
Tracer to implement a functional network)
COLLEGE OF SCIENCE AND ENGINEERING
NIT2222 –NETWORK TECHNOLOGIES –
2.3 IPv6 routing configuration (15 marks)
 Configure EIGRP or OSPF for the IPv6 network
(Place the configuration command here for each router. Then enter to Packet
Tracer to implement a functional network)
2.4 IPv4IPv6 Network NAT-PT (20 marks)
 Configure HQ router for IPv4IPv6 NAT router so that the new IPv6 HQ network
can access the branch C server, which has the IP address 150.50.XX.100.
(Place the command here. Then enter to Packet Tracer to implement a
functional network)
2.5 Verification (15 marks)
 Perform necessary verification to test the performance of the implemented
network in packet tracer. All computers should be able to ping to any other
computers on different networks and to the port on router. Use necessary
screenshots of ping and show commands on computers and routers
2.6 Real deployment (15 marks)
 Select any two Branches of your network and implement using the Physical
Cisco Routers and Switches in room D506. Only the computers are needed for
implementation, the server can be ignored.
 Once you have deployed the network:
o Indicate clearly in your document that which part of the network being
deployed.
o Take screen shot of the routing table of each (physical) router
o Take the screen shots on the (physical) computer showing that you can
ping from one branch to another.