not 2 thousand words but ill let know the sizeAssessment item 4Network Design (Implementation) Due date:10-May-2018Return date:05-Jun-2018Submission method optionsAlternative submission method Task...

This is a practical assessment and will enhance and test your practical skills related to the subject topic. You are required to set up a simple network using minimum three PCs and minimum two routers, or use simulation software to set up the same network.
To complete this assessment you are expected to refer to information beyond the text book. This assignment is open; in that you are free to choose the devices or software you use to complete the specified tasks. Students are expected to accomplish this task by utilising the necessary commands discussed in lectures and also described in the prescribed text book.

There are numerous web sites available that discuss Linux networking. You are expected to list your sources of information for the different tasks. When completing this project, you may encounter errors or experience difficulties getting your setup to work. If this occurs, your challenge is to analyse why they happen and report on how you solved the problems you encountered.

Additional information will be provided for technology options to use in creating this lab closer to the assessment due date.

Task 1 - Setting up a Network

You are required to set up a network consisting of PCs, routers and servers. You need to configure routing between routers (minimum two routers required). The routers will have multiple network interfaces. The PC (client) will be connected to one of the router's interfaces and other PCs (servers) will be connected to the second router's interface.
Client <--> Router <--> Router <--> Server(s)

Setup separate server for each application/service. Each side of the router will be in its own LAN (or WAN) segment and should have a different network address, use ONLY private IP address ranges to design this network.

Perform the following activities and support your workings with screenshots [10 marks]:
1.Configure the PC, Server and Router interfaces with appropriate network addressing;
2.Configure routing (IP packet forwarding) on the routers;
3.On the client ping the client's own network interface, then the local router gateway interface, then the remote router interface, then the server;
4.Use the traceroute command from the client to the server. Include results of the traceroute in your submission.

Task 2 - Configuring Network Services

Using the same network topology that you have setup in Task 1, perform the following additional activities [15 marks]:

1.
DHCP: Configure DHCP on the server and show that the client PC has successfully received an IP Address and other network parameters (default router, netmask, DNS) using DHCP;
2.
WEB Server:Configure a WEB server on dedicated machine, with URL as www.YOUR NAME.csu.edu.au
3.
DNS: Configure a DNS Server on the server device and demonstrate that forward and reverse DNS are working from the client PC; test DNS Server by browsing www.YOUR NAME.csu.edu.au from client PC, DNS must resolve this URL to IP address of WEB Server
4.
Firewall:Configure traffic filtering on the router to block TCP traffic only between one of the client PC and WEB Servers, and provide evidence of such traffic filtering.

A series of screen shots with commentary on each of the required tasks is to be submitted. The submission must include a comprehensive explanation of each task and all the commands used along with the output (or final result) in report format.

This assessment is designed to enhance analytical skills, planning and design capabilities of students under some predefined requirements. In particular, the assessment covers the following learning objectives:

• be able to analyse IP addressing requirements and design an addressing scheme;


• be able to analyse the requirements of IP routing and choose appropriate routing methods;


• be able to demonstrate how internetworking devices obtain their network configuration;


• be able to explain how data flows through the internet; and


• be able to ascertain and evaluate selection of applications and protocols for transferring data across the internet;

Marking criteria

Marks will be awarded for

• Correctness of the commands used


• Correctness of the output (screen shots)


• Clarity of explanation relative to the screen shots


• Correct in-text referencing and reference list according to CSU standard

Presentation

Your report MUST be presented in MS Word format. Your assesmment must be submitted electronically and should :

1. Have a cover page including:
   
   
   1. Assessment No & Assessment Title
   
   
   2. Student Name, ID & Student Email
   
   
   
   


2. The assessment should also include at least the following sections:
   
   
   1. Executive Summary - this section should contain a brief summary about the contents of the report. This section should be a maximum of one A4 size page.
   
   
   2. Main Body of the report - Use this section to answer all the questions in Part I and Part II. All tasks should be clearly identified with headings.
   
   
   3. References - must be in APA style both in-text and at the end of the assessment document.
   
   
   
   


3. Use Calibri, or a similar font, in 11 or 12 point type.


4. All diagrams and images are to be embedded in the document. Diagrams and images that are suppliued separately will not be marked.


5. All text should be left-justified.


6. Each page must have a header or footer with your name and student number.


7. Page numbers must be shown in the footer of each page, except on the title page.

Assessments are marked and feedback is attached using a MS Word based tool. Reports that are submitted in PDF format will be re-formatted to Word format in order to be marked. Allowances will not be made for any loss of information, diagrams or images as a result of the re-formatting.



Please note: Assessment MUST be submitted as ONE word file on EASTS. Please do not submit *.zip or *.rar or multiple files.