Addressing Table for LAN XXXXXXXXXX/28) Device Interface IP Address / Prefix Default Gateway Gateway G0/0/1 First address of the subnet N/A LAN1-S1 VLAN 1 Second last address of the subnet Router...

Not able to solve the assignment.


Addressing Table for LAN1 (10.10.10.0/28) Device Interface IP Address / Prefix Default Gateway Gateway G0/0/1 First address of the subnet N/A LAN1-S1 VLAN 1 Second last address of the subnet Router interface IP address PC-A NIC Last address of the subnet Router interface IP address Addressing Table for LAN2 (10.10.10.16/29) Device Interface IP Address / Prefix Default Gateway Gateway G0/0/1 First address of the subnet N/A LAN2-S1 VLAN 1 Second last address of the subnet Router interface IP address PC-B NIC Last address of the subnet Router interface IP address Instructions Step 1: Configure end devices a. Configure the IP address, subnet mask, and default gateway settings on PC-A & PC-B. Step 2: Configure the router R1 a. Assign a device name to the router (as shown in the addressing table). b. Prevent the router from attempting to translate incorrectly entered commands. c. Configure the system to require a minimum 8-character password d. Assign ciscoPRI as the privileged EXEC encrypted password. e. Assign ciscoCON as the console password and enable login. f. Users should be disconnected after 5 minutes of inactivity g. The router should not allow logins for 2 minutes if 3 failed login attempts occur within 1 minute h. Create a banner that warns anyone accessing the device that “Unauthorized access is prohibited”. i. Configure and activate both interfaces on the router. j. Configure an interface description for each interface indicating which network is connected to it. (Connected to LAN1 or Connected to LAN2) k. Save your configuration Step 3: Configure the switch S1: basic security measures a. Assign a device name to the switch (as shown in the addressing table). b. Prevent the switch from attempting to translate incorrectly entered commands c. Configure and activate the SVI interface d. Configure the default gateway e. Assign red as the privileged EXEC encrypted password. f. Assign red as the console password and enable login. g. Encrypt all clear-text passwords. h. Disable all the unused ports. i. Configure the switch for SSH Access. Use the following parameters 1) Domain name should be cnet-test.com 2) key modulus should be 1024 bits. 3) Local database, username admin with an encrypted password of SSHadmin 4) Enable only to SSH on the inbound VTY connection and use the local database for user verification. j. Save your configuration. Step 4: Configure the switch S2. a. Assign a device name to the switch (as shown in the addressing table). b. prevent the router from attempting to translate incorrectly entered commands. c. Configure and activate the SVI interface d. Configure the default gateway e. Save your configuration. Step 5: Verify connectivity end-to-end connectivity. 2. From PC-A, ping PC-B, S1 and S2. All the pings should be successful. 3. From PC-A or PC-B, establish an SSH session to S1. Use the username admin and password SSHadmin. You should be able to establish an SSH session with S1.