1 COIT20247 Database Design and Development (T2 2022) Assessment item 2—Assignment 2 Due date 11:45pm on Friday of Week 10 Weighting 35% Length Not applicable Objectives This assessment item relates...

1 COIT20247 Database Design and Development (T2 2022) Assessment item 2—Assignment 2 Due date 11:45pm on Friday of Week 10 Weighting 35% Length Not applicable Objectives This assessment item relates to the unit learning outcomes numbers 1, 2 and 3 as stated in the unit profile. Introduction The sample solution of assignment 1 will be released on the unit website approximately two (2) weeks after the assignment 1 due date. You must use that sample solution of assignment 1 only for the following tasks: Assessment task 1 ER Mapping and Normalization a) Map the ER diagram, from the sample solution, into a set of relations in at least Third Normal Form (3NF). You must ensure that your relations meet 3NF. There is no need to show your working. You must specify the primary key, and foreign key (if any) for each relation. b) Select any two of your relations from the previous step (1a), and perform the following for each of those two relations: • List all the functional dependencies exist in the relation. • Demonstrate that the relation meets Third Normal Form (3NF). For your help, an example for a Student relation’s 3NF justification has been provided below: STUDENT (StudentID, Name, Address, DateOfBirth) i. The primary key is StudentID which identifies a student. There will be one student name per Student ID because only one name is recorded for each student. Even though a student may have multiple addresses (e.g. a home address and a work address), the case study states that there is a need to record the home address only and hence there will be only one address for each student. There will be only one date of birth for each student. Thus, there are no repeating groups. Hence, this relation is in 1NF. ii. The primary key is StudentID. This is the only candidate key since Name is not guaranteed to be unique (two different students may have the same name). Address is also not guaranteed to be unique. This means that Student ID functionally determines every other attribute in the table. There is a single valued simple candidate key (StudentId) and therefore no partial dependencies are possible. Hence, the relation is in 2NF. 2 iii. Name cannot be used to functionally determine any other attribute in the table since two different students may have the same name; likewise for address and date of birth. Therefore there are no transitive dependencies in the table. Therefore it meets the requirements of first, second and third normal form. 2 Use MySQL Workbench to create the logical database model Consider the E-R model on the motel booking as the solution of assignment 1 released, Use MySQL Workbench 8.0 CE to create a logical database model with the relations as in Part 1(E-R mapping and normalization), include specifying the primary keys, foreign keys, creating relationships as appropriate, and creating the E-R diagram. Save the file as ecmg.mwb 3 Relational database implementation using MySQL Server Use MySQL Server to perform the physical implementation of the designed database from the above logical model and export the database file as ecmg.sql. In implementing the ER model provided, you must complete the following tasks: • Create all the relations in a MySQL database. Consider each attribute in every table and make appropriate choices regarding data types & sizes, null allowed or not. Your choices should be appropriate for each attribute and should support data integrity. • Indexing can speed up search for particular tables or queries. Review the guideline given in the textbook regarding set-up of index. You should at least ensure the last name and phone attributes in the Guest table to be indexed, and the motel name attribute in the Motel table to be indexed. • Populate the database with sample data of your own. You must include sufficient sample data to test your queries and report. Please note that the expected result of query questions as below should depend on the actual sample data populated. You also can implement your database using MySQL Workbench or via Command Line Client. (Note: Week 6 lecture and tutorial provide the instructions how to export a MySQL database file) Data integrity You are required to implement a constraint of data integrity to enforce the requirement that the booking end date is later than the booking start date. You can save this constraint as the file MyIntegrityConstraint.sql Stored procedures In databases, a stored procedure is a piece of prepared SQL code that you can save, execute and reuse at any time. You are required to write a stored procedure as specified below: Write a stored procedure that can be used to show the booking details of ECMG Rockhampton motel. When the procedure is executed, the details including the contents of guest name, BookingID, start date, end date, roomID, and motel name are displayed. The following image is a sample result. 3 Information requests Create queries to answer the following information requests. You should type the query codes manually using SQL view/editor under MySQL Server. The marking process of the queries for information requests may also consider the effectiveness of your SQL statements that have been used in the queries. It is important that your SQL statement must reflect the correct business logic & SQL syntax. (Use enough sample data so that the output is produced by each and every query. The expected result is under each question. Your result should be in a similar format but may have a different content, depending on the data you populated in your database). Under MySQL Server, save each query question SQL statement as a file such as q1.sql, …, q6.sql. 1. List the details of rooms that have never been booked. The details include roomID, room type motel name, and the price per night. 2. How many rooms does each motel (i.e. branch) have? Show the manager’s name, the branch name and the number of rooms. Order the list so that the manager who has managed the most rooms appears first. 3. Identify the rooms in the motel (i.e. branch) located in Rockhampton with the daily rent no higher than $200 per night. 4. Which guest(s) has/have made more than one booking? Show the guest name, mobile phone and the number of bookings. 4 5. Find the details of the booking(s) that has/have the largest total charges. The details include the guest name, the room ID, the start date, the end date, and the total charge. 6. Which motel(s) has/have the most bookings? Report (optional) MySQL Server doesn’t come with a native Reporting tool. But it is very easy to create a Report by export the data source of a MySQL database to a third-party utility program (such as phpMyAdmin, dbForgeStudio, and Navicat etc.) or Microsoft Excel. As an exercise, we ask you to export the data source to Excel to create a simple report object showing the details of each flight between Rockhampton and Brisbane. When the data source from MySQL exporting to excel, simply call and execute the stored procedure (with a parameter as the pre-set input value) as defined in the relational database implementation section on a sheet of the Excel, then import the data (due to the result of executing the stored procedure) to Excel. In addition, add a report header the Excel sheet. (Note: when you install MySQL Server, if have not installed the component named mysql-for-excel-1.3.8, you need to download and install it separately. The installer is also available on the moodle course website) (Note: This task is optional. No mark allocated) Implementation Report You must also provide a short implementation report describing your experiences with this assignment. You may discuss any of the following: 1. Any two interesting things/procedures you learnt by doing this assignment. 2. Any one requirement of the assignment that was relatively difficult / complex to solve but successfully completed by you. Use the implementation report to demonstrate that you have thought carefully about the issues that arise when implementing a relational database. 5 What you should submit Place the following files in a zip file named Ass2.zip and submit via moodle assignment 2 link. 1. MySQL Workbench logical database model file – ecmg.mwb 2. MySQL database file – ecmg.sql containing: • Create table SQL statements • Tables with sample data with insert SQL statements • Create indexes • The required stored procedures 3. The files of answering five information request questions (q1.sql,…., q6.sql) 4. Data integrity implementation file - MyIntegrityConstraint.sql 5. A Microsoft Word document containing: • A set of relations mapped from E-R diagram (3NF) • Two relations with functional dependencies and demonstration of normalization • Implementation report Your document should contain appropriate identification information (your student number, name, unit number, etc.) and should contain the relevant headings for each section. Important points • You must work individually on this assignment. • The model solution to this assignment will be released approximately two (2) weeks after the due date. • Assignments that are submitted after the release of the model solution will receive zero marks. • You must state in your word document the details of all materials and sources that you used to complete this assignment. This may be as simple as 'This assignment was completed using only the COIT 20247 unit materials'. • Extension requests (by filling in an online form) should be submitted before the assignment due date. • Before submitting your assignment, review the marking criteria provided on the last page of this document. Ensure that all the criteria are