The POHCs from a trial burn are shown in the table below. The incinerator was operated at a temperature of at 1100°C. The stack gas flow rate was 5.90dscm/s. Assume that all the chlorine in the feed...

The POHCs from a trial burn are shown in the table below. The incinerator was operated at a temperature of at 1100°C. The stack gas flow rate was 5.90dscm/s. Assume that all the chlorine in the feed is converted to HCl. The allowable particulate emission is 180mg/m³. Is the unit in compliance if the emissions are measured downstream of the APC equipment?