This is an Arduino assignment. I have a Arduino kit, and I have a coding assignment for it. The Lab 5 Report (unfinished).doc/pdf will be your guide and should answer any questions. When you send me...

1

Lab 5 Report

problem 1: (create code based on information below)
Components:
1 digit 7 segment display (FND)
2 Buttons
Buzzer
Jump Wires
Notice that the button will connect to digital PIN 12 and 13.
_______________________________________________________________________________________
1) when program starts, FND will count down from 9 to 0, and the program will also generate
a random number, either 12 or 13.
2) when hit number 0, the buzzer will be on, simulate an alarm event.
3) during the count down, users will choose a random button to press, if the button PIN is the
same as the random number generated, the count down will stop. Otherwise, the FND will
display a 0 with the buzzer sound on.
4) when 2 buttons press together, the game will reset.
Image this as the scenario from movies, that a bomb is about to explode and officer choose
which wire to cut.
____________________________________________________________________________
(next page)
1. There are instructions on the lab template on how to submit the lab.
Must send me back this document with all the updated information on the next page.
____________________________________________________________________________
(next page)
2. Grading rubrics are also in the template.
____________________________________________________________________________
Name: XXXXX
https://uwwtw.instructure.com/courses/454332/files/43466585?wrap=1
2

Lab Topic: Bomb Squad with Buzzer and Two Buttons implemented using OOPS Concept.
3

1. Objectives:

This project incorporates a buzzer, a 7 Segment Display and 2 buttons and it is to depict a bomb
squad scenario as portrayed in Hollywood movies.
The display will count from 0 to 9 backwards while the 2 push buttons represent the two random
numbers ( Possibly two wires in the above mentioned bomb scenario required to be cut ).
Pressing the correct button will stop the timer without the buzzer being triggered, else the buzzer
will trigger which is interpreted as a failure to diffuse the bomb.
2. Create Circuit Schematics:



4


3. Take Pictures (I can do this myself)

Show some pictures from your lab product, should take clear ones and from different angles.
Ideally, show the states (for example, LED is on, motor is rotating, etc.)
4. Discussions
Link for simulation
https://www.tinkercad.com/things/gO4p7L0itp6-start-
simulating/editel?lessonid=EHD2303J3YPUS5Z&projectid=OIYJ88OJ3OPN3EA&collectionid=O
IYJ88OJ3OPN3EA&sharecode=UEG2klOh1NmgaMwOXbVO_tdygczmm0MBdTFRZNp87B0
Understood the OOPS concepts. The Buzzer will go...