1)
Identify the current name of a DMZ (Demilitarized Zone). (Choose One)
a ANDing
b Network ID
c Host ID
d Screened Subnet
2)
Philips is a trainee who is currently on probation at ICP Solutions. Under which of the following groupings will he classify the network segment on the floors of a building connected by a LAN?
(Choose One)
a Geographic locations
b Departmental boundaries
c Device types
d VLANs
3)
JVC Corporation is a multinational company that has a variety of products worldwide. You are working as a network engineer with the network management team of the company. The network administrator has requested you to submit a network document after subdividing the smaller Human Resources into a separate network segment so that it is convenient for troubleshooting. Under which of the following groupings will you place this network segment in this scenario?
(Choose One)
a Geographic locations
b Departmental Boundaries
c Device types
d VLANs
4)
Which of the following will allow subnets to be further subdivided into smaller and smaller groupings until each subnet is about the same size as the necessary IP address space?
(Choose One)
a VLSM
b Site prefix
c VTP
d Classless addressing
5)
What will be the number of hosts per subnet in a 255.255.255.240 IPv4 Class C subnet mask?
(Choose One)
a 30
b 14
c 62
d 126
6)
You have been appointed to design a subnet mask for a network. The current IP address of the network is 192.169.89.0. You have been requested by the network administrator to divide this local network into nine subnets to correspond to the organization’s nine different floors. How many bits will you borrow from the host portion of the address portion of the ID address in this scenario?
(Choose One)
a Three bits
b Two bits
c Four bits
d Five bits
7)
When a router connects to a switch that supports multiple VLANs, it is sometimes called
________________
(Choose One)
a A router-on-a-stick
b Trunking
c a native VLAN
d ICS
8)
Which of the following VLANs receives all untagged frames from untagged ports?
(Choose One)
a Data VLAN
b Voice VLAN
c Native VLAN
d Management VLAN
9)
Which of the following carries user-generated traffic, such as e-mail, web browsing, or database updates?
(Choose One)
a Data VLAN
b Voice VLAN
c Private VLAN
d Management VLAN
10)
Brown Industries consults you to review and check for faults in a recently
installed port-based VLAN network on its premises. The VLAN has been
segmented according to Brown Industries’ departments such as Sales,
Finance, and Marketing. On inspection, you realize that a virtual sales client,
which should have been plugged into port 6, has been plugged into port 1,
which is reserved for marketing clients. What kind of configuration error are
you facing in this situation?
(Choose One)
a Incorrect VLAN assignment
b Incorrect port mode
c VLAN isolation
d Double tagging
11)
Mason, a new network engineer in your organization, has set up the
configuration of the switch ports to other network devices. On inspection,
you, the network administrator, realize that the configuration has been made
using access mode instead of trunk mode. What kind of a configuration error
are you facing in this situation?
(Choose One)
a Incorrect VLAN assignment
b Incorrect port mode
c VLAN isolation
d Double tagging
12)
Analyze which of the following is true about a default VLAN. (Choose One)
a Ports in default VLAN can be reassigned to other VLANs
b To protect a network from unauthorized traffic, a default VLAN should be changed to an
unused VLAN
c A default VLAN can be used to carry user-generated traffic, such as e-mail, web browsing, or
database updates
d A default VLAN supports VoIP traffic, which requires high bandwidths, priority over other
traffic, flexible routing, and minimized latency
13)
Which of the following can be used to provide administrative access to a
switch?
(Choose One)
a Data VLAN
b Voice VLAN
c Native VLAN
d Management VLAN
14)
You are a network analyst at a securities firm. You have to assign an
identifier to each VLAN used in the network so that the connecting devices
can identify which VLAN a transmission belongs to. Which of the following
will you use in such a situation?
(Choose One)
a Stac master
b VLAN hopping
c SAID
d MTU
15)
You as a network analyst want to make certain changes to a VLAN database,
and you want these changes to be reflected in all other switches in the
network. Which of the following will you use?
(Choose One)
a Stack master
b VLAN hopping
c SAID
d MTU
16)
Which of the following will you use to assign a VLAN based on the switch port
the device is connected to?
(Choose One)
a Static VLAN assignment
b Dynamic VLAN assignment
c SAID
d Subinterface
17)
The part which identifies the network in an IPv4 address is known as
_____________. (Choose One)
a the host ID
b the site prefix
c the network ID
d the VTP
18)
How many bits are used in a network with a subnet mask 0f 255.0.0.0?
(Choose One)
a 8
b 16
c 32
d 64
19)
In the formula 2n=Y, what does
n
represent?
(Choose One)
a It equals the number of hosts available in each subnet
b It is the number of subnets that result
c It equals the number of bits remining in the host portion.
d It is the number of bits that must be switched from the host address to the network ID
20)
Subnetting, which alters the rules of classful IPv4 addressing is known as
_________ . (Choose One)
a IP helper address
b relay agent