MITS5003 Wireless Networks & Communication - 2020 – S1 Research Study Submission Guidelines: This research study is an assessment task which is done in small groups (2 students Max) and you will work...

1 answer below »







MITS5003 Wireless Networks & Communication - 2020 – S1 Research Study Submission Guidelines: This research study is an assessment task which is done in small groups (2 students Max) and you will work together to apply your knowledge, selection, requirements and problem solving. It consists of 10% of marks and will be assessed in Session 5 1, Research Report. In this assessment you will write a critique report on academic paper(s) approved by your lecturer in the field of wireless for applications to real world scenarios of communications and networks. This will cover 1 and 4 of the four learning outcomes of the unit. All submissions are to be submitted through turn-it- in. Drop-boxes linked to turn-it-in will be set up in the Unit of Study Moodle account. Assignments not submitted through these drop- boxes will not be considered. Submissions must be made by the due date i.e. Session -9 or week-9 and time is Friday 4:00 PM. The turn-it-in similarity score will be used in determining the level if any of plagiarism. Turn- it-in will check conference web-sites, Journal articles, the Web and your own class member submissions for plagiarism. You can see your turn-it-in similarity score when you submit your assignment to the appropriate drop-box. If this is a concern you will have a chance to change your assignment and re- submit. However, re-submission is only allowed prior to the submission due date and time. After the due date and time have elapsed you cannot make re-submissions and you will have to live with the similarity score as there will be no chance for changing. Thus, plan early and submit early to take advantage of this feature. You can make multiple submissions, but please remember we only see the last submission, and the date and time you submitted will be taken from that submission. Your document should be a single word or pdf document containing your report. This research study requires in-depth reading and analysis of a single specific topic. This one topic can be of your choice, but the topic must have been covered in this course and approved by the unit lecturer. You are required to choose one research topic and few relevant research papers in the area of interest. A through research work on the theme of that topic and write a small report on that research paper which should contain the following parts: • Introduction to the topic • Introduction to that paper, their main work. • Detail description of the methodologies employed in that paper. • Comparison of the results reported in that paper with other such research. • Your comments on the advantages/disadvantages/superiority of this paper’s methodology. • Suggest your changes/future-directions for that paper to improve it (if any). • Conclusion. • References. The research paper you need to choose should be published work in well-reputed Journals or Conferences. MITS5003 Wireless Networks & Communication -
Answered Same DayMay 07, 2021MITS5003

Answer To: MITS5003 Wireless Networks & Communication - 2020 – S1 Research Study Submission Guidelines: This...

Kshitij answered on May 08 2021
146 Votes
Wireless network control
Student name
Student ID
Introduction
The introduction and composition of the various wireless network control system was done with taking the help of spatially distributed sensors, actu
ators and the multiple controllers installed in the same for the purpose of communicating the signals through the modern wireless network instead of making use of the conventional wired or point to point networks.as there is a noticeable advancement in the network system and the technology of wireless control have been developed and along with same the networking, sensing, computing and the advancement In control system have also taken place and the manner in which the control systems are integrated with the related information and the physical procedure like internet of things, cyber physical system, etc. the same was revolutionary advancement in the history of IT sector. In the wireless network control system the nodes which are connected to the physical sample with the help of the sensors senses the signals and transmits the same through the wireless medium and the respective controllers installed control and compute the commands of the control and based on the data made available through sensors make the requisite actions for controlling the same and then finally the data is being transmitted to the actuators for the purpose of influencing the dynamic of the physical sample.
Methodologies
To overcome the deficiencies of the conventional point to point wired network the introduction for wireless network was made (Coutinho, Boukerche, et.al., 2017). Hence various communication network and methodologies were taken into account for implementing the same few of them are stated below:
Network topology
In the present communication network which has been put to use in the network control system the traditional components for undertaking the control procedures involves sensors, the controller and the actuator which works as the nodes of the network in the network topology, considering the above perspective here are the certain issues which need to addressed in a rational manner and they are time...
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here