1. Define the DOE in Minitab to specify the appropriate design. Keep in mind that the data should be an experiment involving 16 combinations XXXXXXXXXXwith 3 replicates each to study the 6 different...

1.    Define the DOE in Minitab to specify the appropriate design. Keep in mind that the data should be an experiment involving 16 combinations (26-2) with 3 replicates each to study the 6 different factors (i.e., 48 total samples).
2.    Using the ink simulator (InkSimulator2017OddID.xls for odd UIN’s and InkSimulator2017EvenID.xls for Even UIN’s), collect the data for your DOE based on the Minitab design.
3.    Analyze the data to determine the significant main effects and interaction effects. Re-run your analysis using only those deemed significant. Use a significance level of 0.05.
4.    Recommend the settings for the above factors that can help this company achieve the target of delamination for their product of 9.0, using the longest possible Pot Life time. Note1: You may need to round up the response optimizer result to achieve a ~9 rating. Note2: Interpret the coded settings and translate them into actual units for those settings with numerical values, for non-numerical, just interpret your findings as a categorical level between the Low/High levels. (Remember that the maximum allowable rating is 10).